Dual jet hand dryer is how it works

First, the commercial dual jet hand dryer must be mounted onto the wall in the desired facility and then can either be plugged into an outlet or hardwired by an electrician. All the user needs to do is insert their hands into the gap and slowly pull them out while the screen counts down the seconds. It works in just 10 seconds - completely removing water from the palms and backs of the hands by means of two discharges of air on either side. Hands will be completely dry, with no hand rubbing or turning required. The built-in heater facilitates an immediate release of warm air to speed up the hand drying process while the waste water is stored in a tank for easy and convenient disposal.
It\'s Quick! And it\'s that easy.

HIGH SPEED
High speed hand dryer feel dry in as little as 10 seconds
The powerful discharge of air on either side of the hand leaves moisture dripping and hands dry.
The release of warm air from the built-in heaters helps speed up the hand drying process.

SANITARY & CLEAN
It works automatically and does not require any contact with the hands.
Waste water is collected in drain tank, the floor and surrounding surfaces stay clean and dry.
It eliminates the need to use paper towels, so the room stays cleaner and tidier
as a result of eliminated paper waste.

ECONOMICAL:
It uses only 650W of power
compared to other hand dryers that typically require around 2400W.
Over 75% cost saving vs. Paper towels.
The short drying time uses minimal energy compared to other hand dryers.